You tried to load an effect plugin into a channel fl studio 12 как исправить

Обновлено: 02.07.2024

Здравствуйте! Проблема с добавление библиотек в Kontakt 5 . Приобрел компьютер,поставил Win7 Ultimate и контакт перестал сохранять библиотеки. То есть - все добавляется без проблем,работает,но стоит закрыть FL,как при следующем запуске из Контакта изчезают библиотеки. Что еще более странно,так это то,что две библиотеки все таки сохранились! До этого все работало нормально. Битность системы назвать затрудняюсь. По свойствам компа х64,но на диске С есть еще Program Files (x86). Сам FL (FL 11 Producer Edition кстати) установился именно туда. Я перепробовал массу методов,начиная от установки всех плагинов и компонентов в одну директорию и заканчивая попыткой добавить библы в Контакт через .reg файл. Все бестолку.Буду рад любому совету!
БА-РА-БА-НЫ!

CrashDrummer, бывает, что программа не может что-то сохранить, если ей не разрешает операционная система.

Клик. Может быть здесь похожая проблема. Если дело не в отсутствии прав на изменение содержимого, то подожди какого-нибудь опытного пользователя этого сэмплера.

бывает, что программа не может что-то сохранить, если ей не разрешает операционная система.

Клик. Может быть здесь похожая проблема. Если дело не в отсутствии прав на изменение содержимого, то подожди какого-нибудь опытного пользователя этого сэмплера.

Спасибо!Кое как дал разрешение на сохранение.Но не помогло..Решил скачать Сервис Центр (оффициальный) - и сразу автоматом встали еще две библы! Но почему то только 2,остальные как терялись - так и теряются. Может быть найти где то ломаный Сервис Центр.
БА-РА-БА-НЫ!

помогите пожалуйста, после покупки fl 11, стал некорректно функционировать плагин от Native Instruments, Massivе.
выражается это в том, что после какой либо манипуляции с плагином не работает миди ввод и приходится кликать мышью в любой области программы, кроме области плагина, чтобы ввод зафункционировал.
переустановка не решает проблемы.
Откликнувшимся, и всем, кто хоть как-то постарается помочь, заранее выражаю благодарность.
Я уверен, что здесь каждый второй опытный пользователь сталкивался с этой проблемой и знает пару возможных способов устранения данной неполадки. (image) FL st. перестала внезапно открывать все добавленные VST (типа как NExus)

Ребята, помогите разобраться, после установки плагина и его запуска, выскакивает такая штука You tried to load an effect plugin into a channel. Load the plugin "Название плагина" into the mixer instead.

Issues with VST / AU Plugins in FL Studio (Plugins behaving badly)

These are VST / AU plugins with known problems in FL Studio, and the solution(s). The list is not complete, but we add problem plugins as we find them. If you have a plugin that you fixed a problem for, that isn't currently listed here, please report it in the Technical Support Forum and inform us about the issue so that we can add it to the KB article.

If your plugin is not listed below, try the steps listed in the FL Studio manual - 'Plugins behaving badly'.

Always start by downloading the latest version of the plugin from the developer and the latest version of FL Studio available to you.

PLUGINS ARE LISTED ALPHABETICALLY BELOW

32 Lives (macOS 32 > 64 Bit Wrapper)

Problem: Projects crash on opening. If this plugin 'expires' or becomes 'unregistered' on macOS, 32 Bit plugins will no longer be bridged to 64 Bit and FL Studio Projects will crash when you open them.

Solution: Make sure the plugin is activated and the latest version installed.

AG Works Chorus CH-2

Problem: No sound and the audio monitor shows a single line at the extreme left or right

Solution: Switch on 'Use fixed size buffers' option in the wrapper (you'll have to reset/reload the plugin for it to take effect)

AIR Music Technology Xpand!2

Problem: Arp presets rendering out of sync.

Solution: Select 'Wrapper Settings > Processing' and enable 'Use fixed size buffers' and 'More > Process maximum size buffers'. Note: Apply to affected instances only.

Arturia Analog Lab

Problem: The plugin does not respond to Automation Clips or recorded automation event data.

Solution: Select 'Wrapper Settings' and disable 'Notify about parameter changes'.

Audio Damage Axon

Problem: The plugins own mixer doesn't have any effect on the sound.
Cause: Each plugin voice is sent to a separate output, so the full sound is heard regardless of the mixers settings.
Solution: Select 'Wrapper Settings > Processing' and disable 'Process inactive inputs and outputs' as well as the additional plugin outputs.

Brainworx (bx)

Problem: The plugins react differently while rendering to automations or internal controllers.
Solution: Select 'Wrapper Settings > Troubleshooting' and enable 'Use fixed size buffers'.

Celemony Melodyne Editor

Problem: Playback position isn't correct in some cases.

Solution: Select 'Wrapper Settings > Processing' and disable the 'Send loop position' option. Note: This workaround is not necessary in FL Studio 9.0.3 or higher.

E-MU Emulator X3

Problem: Crashes or produces no output.

Solution 1: Disable 'Ultra-High Precision Interpolation' within Emulator X3.

Solution 2: Copy the following files into both the Windows\System32 and Windows\SysWOW64 folders: - EmulatorXVSTi_lib.dll, found in 'Program Files (x86)\Creative Professional\Emulator X' - EmulatorXVSTi_lib64.dll, found in 'Program Files\Creative Professional\Emulator X'

East West Play

Problem: Strange noises and glitches while during playback.

Solution: Select 'Wrapper Settings > Processing' and enable the 'Use fixed size buffers' option.

Problem: Truncated notes in rendered audio file.

Solution: Select 'Wrapper Settings > Processing' and enable 'Notify about rendering mode'.

East West Play 64 Bit

Problem: Projects crashing.

Solution: Disable the 'Reset plugins on transport' option in FL Studio Audio Settings.

Fabfilter Plugins

Problem: When using multiple instances of fabfilter plugins you may experience CPU overload and lockups caused by graphics acceleration.

Solution: Refer to 'How to disable graphics acceleration'. According to FabFilter their use of OpenGL hardware acceleration doesn't work well with some graphics card drivers.

Kv331audio

Problem: Stutter effect after rendering.

Solution: Select 'Wrapper Settings > Processing' and enable the 'Use fixed size buffers' option.

Lurssen Mastering Console

Problem: Excessive CPU usage.

MOTU Symphonic Instrument

Problem: High CPU load.

Solution: Select 'Wrapper Settings > Processing' and enable the 'Use fixed size buffers' option.

Native Instruments Bandstand

Problem: Rendering out of sync.

Solution: Select 'Wrapper Settings > Processing' and enable 'Notify about rendering mode'.

Native Instruments Kontakt

Kontakt instruments use a special 'scripting' language within patch libraries, and so, some libraries may cause issues while others do not. This depending on the features in use within the patch.

Problem: Crashes

Solutions: Have you worked through the solutions provided by Native Instruments for macOS here and Windows here?

Problem: Audible artifacts that occur at higher or lower tempos.

Solution: Enable 'Align tick lengths' in FL Studio Audio Settings.

Problem: Timing issues in rendered tracks.

Solution: When 'Use fixed size buffers' is in use under 'Wrapper Settings > Processing', disable 'Process maximum size buffers'.

Problem: Experiencing clicks, pops, and CPU spikes within Kontakt.

Solution: Select 'Wrapper Settings > Processing' and enable the 'Use fixed size buffers' option.

Problem: ' OrangeTreeSamples Passion Flute ' library doesn't output audio after using FL Studio transport controls.

Solution: Disable 'Reset plugins on transport' in FL Studio Audio Settings.

Problem: Slow loading of patches.

Solution: Within Kontakt select 'Browse > Files > View' and disable 'show network drives, show removable drives, show foreign formats'.

Native Instruments Reflektor

Problem: Audible Buzzes/Crackles/Noises

Solution: Enable 'Align tick lengths' option in FL Studio Audio Settings.

Output Movement

Problem: Spiking/high CPU usage

Solution: Select 'Wrapper Settings > Processing' and enable the 'Use fixed size buffers' option.

Parallax-Audio Virtual Sound Stage 2

Problem: Crashes during rendering.

Solution: Select 'Wrapper Settings > Processing' and enable 'Use fixed size buffers' and 'Notify about rendering mode' options.

Positive Grid Bias FX

Problem: Rendering out of sync.

Solution: Select 'Wrapper Settings > Processing' and enable 'Notify about rendering mode', disable 'Use fixed size buffers > Process Maximum Size Buffers'.

Propellerhead Reason (through ReWire)

Problem: Reason fails to load with either of the following error messages: 1. 'Reason engine unable to open. Please check your Rewire host' 2. 'Could not connect to the Reason engine. The Reason engine is already in use'

Solution: Disable 'Auto close device' in FL Studio Audio Settings.

rcg:audio sfz

Problem: Memory error, 'Out Of Memory'

Solution: From the sfz options set the mode from SF32 to PR32. sfz has a memory bug that sometimes appears in SF32 mode.

reFX Nexus w/ Expansions

Problem: Crashes

Solution: Select 'Wrapper Settings > Processing' and enable the 'Use fixed size buffers' option.

reFX Nexus 2

Problem: Unexpected CPU spikes.

Solution: Either disable the 'Export with ultra quality' option in Nexus or select 'Wrapper Settings > Processing' and disable the 'Ensure processor state in plugin callback' option.

Problem: Won't open.

Solution: Update your eLicenser.

reFX Nexus 3

Problem: Crashes on loading projects. This appears to be related to a plugin crash when more than 3 instances of the plugin are in use in a project.

Solution: Update to Nexus 3.0.8 or later.

Reveal Sound Spire

Problem: Spire not working properly in FL Studio, freezing and crashing.

Solution: Use the recommended settings provided by Reveal Sound in ' Note For FL Studio Users! '. Select 'Wrapper Settings > Processing' - Enable the 'Use fixed size buffers' then from the 'More' menu enable 'Use maximum buffer size from host'. Finally, disable 'Allow threaded processing'

Steinberg Hypersonic 2 Attention: NO DirectX and DXi plugin support in version 11 or higher!

Problem: The DXi version of the plugin doesn't work very well in FL Studio.
Solution: Use the VST version (In FL Studio 11 and under select 'Channel > Add one > More. ' scroll down to the VST section).

Siegfried Kullmann Q8L VSTi (Ensoniq SQ80 emulator)

Problem: Audio glitches when using multiple instances.

Slate Digital plugins

Problem: No output.

Solution: Select 'Wrapper Settings > Processing' and enable the 'Process inactive inputs and outputs' option.

Sonible Plugins

(for example: entropy:EQ+)

Problem: Freezes, no output or lagging GUI
Solution: Select 'Wrapper Settings > Processing' and enable the 'Use fixed size buffers' option.

Spectrasonics Omnisphere

Problem: Audible glitches on some presets.

Solution: Select 'Wrapper Settings > Processing' and enable the 'Use fixed size buffers' option.

Spectrasonics Omnisphere 2

Problem: Crashing when changing presets.

Solution: Select 'Wrapper Settings > Processing' and enable the 'Use fixed size buffers' option.

Spectrasonics Trilian

Problem: Missing sections on rendering.

Solution: Select 'Wrapper Settings > Processing' and enable 'Notify about rendering mode' option.

SynthEdit made plugins

Problem: Audio glitches and stuttering, possible crashes.

Solution: Select 'Wrapper Settings > Processing' and disable the 'Allow threaded processing' option.

Toontrack Superior Drummer

Problem: No audio if 'Smart Disable' is enabled and only the internal sequencer is used.

The reason is that smart disable will disable any generators and effects that are not used, as Superior Drummer is not used via MIDI or automations, it will be disabled.

Solution: Select 'Wrapper Settings > Processing' and disable the 'Allow smart disable' option.

Tytel Helm & Vital

Problem: GUI messed up

Universal Audio

Problem: Tracks containing UAD plugins render out of sync.

Solution: Enable LiveTrack Mode on your UAD plugins prior to exporting the project.

LiveTrack Mode is covered on pg. 74 of the UAD System Manual.

Voloco

Problem: Crash at export.

Solution: Select 'Wrapper Settings > Processing' and enable 'Use fixed size buffers' options.

VSL Vienna Ensemble Pro

Problem: CPU overload when configuring several buffers of latency, causes FL Studio to become unresponsive.

Solution: Select 'Wrapper Settings > Processing' and enable 'Use fixed size buffers' and 'Process maximum size buffers' options.

Waves Plugins

Problem: Issues installing Waves plugins.

Problem: Waves plugins not working (General).

Xfer Serum

Problem: Serum crashes FL Studio when added or used within a project, caused by a suspected VST GUI/Direct2D conflict.

How to Install VST / AU Plugins (Instruments & Effects)

  1. Install the plugin - We strongly recommend you run the plugin's installer and use its default install location OR for VST/AU plugins without an installer, copy the files to the appropriate folder set in the Plugin Manager > Plugin search paths field. NOTE: The best manual method is always to install to one of the default plugin locations for your OS. Only use the Plugin Manager to add additional plugin install and search locations if you have a specific and valid reason.



  1. Prepare the plugin - Configure the plugin with the default preset you prefer and any wrapper settings (e.g. Scaling options) before creating a favorite. This will ensure the plugin will always load in the preferred state.
  2. To categorize a plugin (generator/effect) - This will 'favorite' it, available from the standard locations as mentioned above. Open the Browser > Plugin database > Generators or Effects to the sub-folder where you would like to add the plugin and select 'Add to plugin database (flag as favorite)' from the plugin wrapper menu (shown below).


Related Links:

      - Learn more about instruments (generators) pre-installed in FL Studio. - Learn more about the effects pre-installed in FL Studio. - Learn more about the plugin standards supported by FL Studio.

    What Plugin Types Are Supported & Where Are They Located?

    Virtual Studio Technology (VST) Plugins (Windows and macOS)

    VST is a software interface standard that allows you to load VST software synthesizer and effect 'plugins' in FL Studio. VST is in addition to the FL Studio 'native' plugin format. VST plugins generally come in two types, instruments (VSTi) that are designed to make sound and effects (VST) that are designed to process sound, although some can do both. FL Studio categorizes VST instruments as 'Generators' because some also generate control or note data, rather than sound. VSTs are self-contained programs that 'plug-in' to FL Studio giving you access to a, virtually unlimited, source of new instruments and effects.

    NOTE: VST format plugins for Windows and macOS are not compatible. Use the correct Windows or macOS installer for your operating system of choice. It is common to find free VST plugins with Winodws but no macOS version.

    Important notes about 32 vs 64 Bit, GUI Scaling & Plugin Names

    • Plugin compatibility - Just as FL Studio is available in 32 (Windows only) and 64 Bit versions, VST plugins can also come in 32 or 64 Bit format. FL Studio for macOS only supports 64 Bit plugins . The bit-depth of plugins determines how much memory the plugin can access. It has nothing to do with 'audio quality'. We STRONGLY RECOMMEND using 64 Bit plugins in FL Studio 64 Bit and 32 Bit plugins in FL Studio 32 Bit. On Windows, if you load 64 Bit plugins in FL Studio 32 Bit or 32 Bit plugins in FL Studio 64 Bit, a 'bit bridge' will automatically be used. Bridging consumes about 2% extra CPU, per plugin. Certainly, a few bridged plugins won't normally matter, but bridging 10 or more plugins definitely will waste CPU capacity. Bridging is automatic, you don't need to do anything special to make it happen, one reason to pay attention to what plugins you are using. The Wrapper Settings Tab will show if a plugin is bridged and its Bit version. NOTE: You can install both 32 and 64 Bit versions of a plugin, if available. Many older, free VST plugins you can find online, are only available in 32 Bit.
    • Project compatibility - You can load projects made with FL Studio 32 Bit in FL Studio 64 Bit and vice versa. When you load a FL Studio 32 Bit project in FL Studio 64 Bit, all plugins are automatically loaded with 64 Bit versions, if the 64 Bit version exists. When loading 64 Bit projects in the FL Studio 32 Bit the reverse is also true, FL Studio will try to find 32 Bit versions of all plugins. If the bit-equivalent plugin is not available, then the bit-original plugin is loaded and bridged (see the point above).
    • More Bit related information - Click here to see the FL Studio 32 vs 64 Bit FAQ online.
    • VST GUI Scaling - High resolution monitors will shrink VST plugin interfaces. See the section on Rescaling VST Plugins to fix this. NOTE: Native plugins use a different scaling system, see here.
    • VST plugin names - Unless you set the File Settings > Manage plugins > Verify plugins switch, FL Studio will perform a 'fast scan'. Fast scans only identify plugins by the name of the VST's .dll file (which is the VST plugin). If the plugin name is changed, either by you or the manufacturer, FL Studio won't find it when loading projects using the plugin. The Verify plugins option gathers unique identification codes for each plugin that allows FL Studio load plugins even if the file name has been changed. In addition, the Verify plugins scan identifies plugins as Generators (Instruments) or Effects, simplifying plugin management, so we strongly recommend you use the Verify plugins setting.

    Audio Units (macOS only)

    Audio Units (AU) are an Apple standard tied to Core Audio and so only compatible with FL Studio for macOS. AU is Apple's equivalent to VST. As there are many similarities between the two standards, you can usually find both macOS AU and VST versions of plugins.

    • Sharing projects - If you are sharing projects with Windows users, you must use the VST versions of plugins. This will maximize compatibility between projects since the AU versions of plugins will not be matched with the VST equivalent. VST plugins on macOS will be matched with VST plugins on Windows.
    • 64 Bit only - FL Studio for macOS is only compatible with 64 Bit AU and VST plugins. There is no automatic bridging as there is with VST on Windows. See here why we did not support 32 Bit on macOS.
    • AU vs VST - We recommend using the VST version of plugins, when available, on macOS. There are two reasons; 1. This will ensure Mac/Windows compatibility when sharing projects. AU plugins do not use the same naming conventions and so FL Studio won't be able to match a VST and AU plugin when loading projects. 2. Most 3rd party developers create VST plugins, then add an additional layer of code to provide AU compatibility. This means VST plugins may have slightly less processing overhead compared to their AU counterparts. However, you if you have problems with either format try the alternative AU or VST instead, and check the relative CPU usage also.
    • AU & VST locations - If your plugin's are installed to the default macOS locations, all you need to do is a 'Verify plugins' scan to access them in FL Studio.
    • MIDI out - AU does not support MIDI output.

    Plugin Default Locations

    If you use the plugins default installer you should not need to worry about the information below. FL Studio will find your plugin in one of the following default locations. This information is provided for installing legacy plugins, without an installer. Choose the appropriate folder based on its VST / AU specification.

    NOTE: If a plugin is not located, make sure you have selected 'Verify plugins' and 'Rescan previously verified plugins' in addition to installing the plugin to one of the default locations below. DO NOT install plugins to the FL Studio installation folder (. \Image-Line\FL Studio\Plugins\VST). This is a special folder for legacy native FL Studio plugins.

    Windows

    1. The '..\Program Files\Common Files\VST2' (64 Bit plugins on a 64 Bit Windows only).
    2. The folders set as the Extra search path in the Plugin manager (32 Bit plugins).
    1. The '..\Program Files\Common Files\VST3' & '..\Program Files\VST3' folders (32 Bit plugins on 32 Bit Windows OR 64 Bit plugins on 64 Bit Windows).
    2. The '..\Program Files (x86)\Common Files\VST3' & '..\Program Files (x86)\VST3' folders (32 Bit plugins on Win 64 Bit Windows).

    macOS

    1. [Macintosh HD]/Library/Audio/Plug-Ins/VST
    2. [Macintosh HD]/Users/Username/Library/Audio/Plug-Ins/VST (rarely used)

    1. [Macintosh HD]/Library/Audio/Plug-ins/VST and Library/Audio/Plug-ins/VST3
    2. [Macintosh HD]/Users/Username/Library/Audio/Plug-Ins/VST3 (rarely used)

    Читайте также: