Как обновить elixir ubuntu

Обновлено: 04.07.2024

Но в отличие от map, я не могу получить новую структуру, когда ключ в переменной:

Вопрос: Как получить новую структуру, когда у меня есть ключ для обновления в переменной?

3 ответа

Можно ли обновить вложенный список ключевых слов в elixir? Например, я пытаюсь сделать следующую работу Keyword.put(conn.private.phoenix_endpoint.config(:url), :host, conn.host) Но каким-то образом обновленный хост не отражается в переменной conn .

Структуры обеспечивают проверку во время компиляции того, что ключи данных ограничены указанными значениями. По этой причине невозможно использовать динамический ключ с семантикой структуры, поскольку значение ключа известно только во время выполнения.

Вы можете обновить данные, но вам придется использовать семантику карт и отказаться от проверок во время компиляции:

Они выдадут вам ошибку времени выполнения, если key не является допустимым.

Вот почему при использовании структур лучше указывать ключи во время компиляции, используя семантику структур, если это возможно.

В Elixir структуры могут иметь только те ключи, которые вы назначили им в макросе defstruct .

Вы можете использовать % просто отлично, пока значение key является одним из ключей, которые есть у struct.

Вы можете использовать Kernel.struct/2 , который позволяет вам использовать оператор трубы Elixir. Используя свой пример структуры, вы можете использовать Kernel.struct/2 следующим образом:

У меня есть вопрос о присвоении переменной в Elixir. В Erlang году это поднимет no match of right hand side value : X = 4. X = 2. Однако в Elixir вполне нормально присваивать значение переменной более одного раза. Я смущен тем, как работает сопоставление шаблонов в Elixir. Как Elixir различает.

Я использую couchbeam , чтобы связаться с CouchDB из Elixir. Но lib возвращает мне старое представление объекта erlang, например <[]> , а не elixir карт, это было связано с тем , что lib использовал jiffy:decode без return_maps , как мне преобразовать эту структуру объекта в Elixir карт.

Похожие вопросы:

Это должно быть просто,но я не могу понять. Как, например, назвать структуру с помощью переменной. char *QueryName = GetAirports; Query QueryName = malloc(sizeof(Query) + RecordCount*sizeof(int));.

Я использую Elixir для извлечения json из внешнего API и хранения его в базе данных Postgresql. Я использую яд для декодирования json в Elixir ЭКТО (2.0) схемы. Он работает хорошо, за исключением.

Можно ли обновить вложенный список ключевых слов в elixir? Например, я пытаюсь сделать следующую работу Keyword.put(conn.private.phoenix_endpoint.config(:url), :host, conn.host) Но каким-то образом.

У меня есть вопрос о присвоении переменной в Elixir. В Erlang году это поднимет no match of right hand side value : X = 4. X = 2. Однако в Elixir вполне нормально присваивать значение переменной.

Я использую couchbeam , чтобы связаться с CouchDB из Elixir. Но lib возвращает мне старое представление объекта erlang, например <[]> , а не elixir карт, это было связано с тем , что lib.

Факт, который мы знаем о Elixir, заключается в том, что структуры данных, которые живут в памяти, неизменны, а переменные-это просто указатели на эти структуры данных . Есть ли способ получить адрес.

У меня они установлены: $ asdf list elixir 1.6.6 erlang 20.3.8 но ни за что на свете я не могу понять, как обновить свою версию elixir до 2.x. Я нахожусь на Ubuntu, кто-нибудь может помочь?

Я пытаюсь получить доступ к свойству объекта с помощью переменной с Elixir, но когда я пытаюсь использовать x[:variable], кажется, что он не повторяется как переменная, а указывает, что я пытаюсь.

но ни за что на свете я не могу понять, как обновить свою версию elixir до 2.x. Я нахожусь на Ubuntu, кто-нибудь может помочь?

1 ответ

Я хочу установить последнюю версию Elixir на Ubuntu 15.10. Я должен следовать установке . Но я получил только Elixir 1.1.0-dev . Но последняя версия-1.2. Как я его получу?

В Ubuntu terminal, когда я пишу команду ниже: scala -version Это дает следующий результат: Scala code runner version 2.9.2 -- Copyright 2002-2011, LAMP/EPFL Я хочу обновить это до 2.11.8. Я скачал файл tar scala-2.11.8.tgz и неосторожно его достать scala-2.11.8 папка в расположении /home/hdadmin/.

Независимо от языка, с помощью asdf version manager вы не "update" выполняете данную установку языка.

Вы просто устанавливаете новую версию ( asdf install <plugin> <version> ) и удаляете старую ( asdf uninstall <plugin> <version> ), если она вам больше не нужна.

Кроме того, вы можете изменить свою версию "default", используя asdf global <package> <version> .

Узнайте больше о доступных командах:

Похожие вопросы:

Я хочу обновить версию узла JS на Ubuntu. Я перепробовал много команд, но его версия все еще старше, то есть v0.10.37. Я пытался: sudo npm install -g n sudo n install 0.12.4 sudo n use 0.12.4 Также.

Как обновить версию Erlang на Ubuntu (R14B04 до последней стабильной версии)?

Я хочу установить последнюю версию Elixir на Ubuntu 15.10. Я должен следовать установке . Но я получил только Elixir 1.1.0-dev . Но последняя версия-1.2. Как я его получу?

В Ubuntu terminal, когда я пишу команду ниже: scala -version Это дает следующий результат: Scala code runner version 2.9.2 -- Copyright 2002-2011, LAMP/EPFL Я хочу обновить это до 2.11.8. Я скачал.

Я пытаюсь обновить Elixir на Mac OSX. Homebrew показывает, что я успешно обновился. Но когда я запускаю elixir --version, я получаю старую версию?? Есть ли дополнительный шаг, который мне нужно.

У меня есть ubuntu 14.04, я работаю в проекте с elixir, и мне нужно иметь erlang/otp 18, как бы то ни было в актуализации систем я предполагаю, что последняя версия erlang была установлена, и это.

Я использую brew install elixir для установки elixir на Mac. Он работает для выпущенной версии, которая на данный момент является v1.5.2 . Как я могу установить dev-версию типа Elixir >=.

Я хотел бы проверить версию фреймворка Phoenix из командной строки, как я проверяю Elixir (elixir -v)

Я пытаюсь перейти с версии 1.3.4 на v1.4 , но ничего не вижу в руководстве по установке или началу работы относительно обновления текущей установки. Я знаю, что мог бы просто сделать новую установку Elixir, но каков стандартный способ обновления до более высокой версии?

1 ответ

Я настраиваю модуль в Drupal, и в этом модуле я хотел бы обновить текущую страницу сразу после if statement, как я могу обновить текущую страницу в PHP

Какова последняя версия маршрутизатора Angular2? и как я могу обновить свою текущую старую версию с помощью команды git bash?

В среде Windows наиболее предпочтительным способом является использование Chocolatey для установки Elixir. Chocolatey-это инструмент управления пакетами Windows. Самое приятное в этом то, что вы можете обновить до последней версии Elixir или установить определенные версии.

Похожие вопросы:

Я пытаюсь установить веб-сервис Amazon gem в свой проект (я использую window и Aptana RadRails), но он попросил меня обновить текущую версию Ruby (1.8.5) до 1.8.7. Я использую InstantRails для.

Как проверить текущую версию SymPy и перейти на последнюю версию? Я использую macOS. То, как я установил свою текущую версию, использует pip install sympy .

Я скачал обновление springsource-tool-suite-3.5.1.RELEASE-e4.4-updatesite. Теперь, как мне обновить текущую версию sts с помощью обновления? Могу ли я просто извлечь его и поместить в ту же папку.

Я настраиваю модуль в Drupal, и в этом модуле я хотел бы обновить текущую страницу сразу после if statement, как я могу обновить текущую страницу в PHP

Какова последняя версия маршрутизатора Angular2? и как я могу обновить свою текущую старую версию с помощью команды git bash?

Я использую brew install elixir для установки elixir на Mac. Он работает для выпущенной версии, которая на данный момент является v1.5.2 . Как я могу установить dev-версию типа Elixir >=.

Итак, у меня есть проект phoenix, который я использую в качестве своего рода тестового приложения. Если я хочу использовать локальную версию исходного кода elixir, который я использую (и вношу.

Поэтому мне удалось написать сценарий powershell, который выводит список всех компьютеров в моем домене с их версией bios. Теперь следующая задача-получить текущую версию BIOS соответствующих.

Я хотел бы проверить версию фреймворка Phoenix из командной строки, как я проверяю Elixir (elixir -v)

У меня они установлены: $ asdf list elixir 1.6.6 erlang 20.3.8 но ни за что на свете я не могу понять, как обновить свою версию elixir до 2.x. Я нахожусь на Ubuntu, кто-нибудь может помочь?


Elixir is a wonderful language. Expressive, productive, scalable, fault-tolerant… it’s pretty darn cool. But how do we manage projects which use different versions?

Want to get started as fast as possible? Do you only need the latest version of Elixir? Then Elixir’s official installation guide is the best place to start :)

For everyone else — if you want to easily switch between different versions of Elixir (and Erlang) for different projects: keep on reading below.

What do you do if one project needs Elixir 1.7 while another needs Elixir 1.3 How do you switch between versions of Elixir and Erlang?

I suppose we could manually uninstall and re-install different versions when moving between projects, but that sounds tedious, unproductive, and downright confusing for all involved. There must be a better way… right?

asdf lets us easily install and manage multiple versions of almost any language (Node, Ruby, Elixir, Python, etc.). We can even tell asdf to use different language versions for different projects. Very nice.

So what will we be doing with asdf? In part 1 (that’s this article), we’ll be:

  1. Installing asdf (on Mac & Linux)
  2. Installing the Elixir and Erlang plugins for asdf
  3. Installing older versions of Elixir and Erlang (1.3.4 and 19.3 respectively)
  4. Telling asdf to use Elixir 1.3.4 and Erlang 19.3 globally
  5. Creating a new project using Elixir 1.3.4
  6. Telling asdf to always use Elixir 1.3.4 and Erlang 19.3 for our new project (local scope)

Then in part 2, we’ll be:

  1. Installing Elixir 1.7.4 and Erlang 21.1 (the latest versions at the time of writing)
  2. Telling asdf to use the new versions of Elixir and Erlang as our global default (global scope)

By the end, our system will be set up to use the latest versions of Elixir and Erlang by default (called the global scope) and we’ll have a project that will always use Elixir 1.3.4 (even on other people’s machines if they use asdf!).

But first… we need to install asdf. Let’s get started!

Installing on a Mac using homebrew

Install asdf using homebrew:

  1. Open up Terminal
  2. Ensure you have the latest version of homebrew:

If you get a command not found error , install homebrew using the command found here.

3. Now that homebrew is updated, let’s install asdf:

Now that asdf is installed, we’ve got to add it to our shell path.

To do this, we can use a couple of handy commands to append asdf’s path to our shell config file:

Run the following two commands if you’re using bash:

Or run these commands if you’re using zsh:

Or run these commands if you’re using fish:

Now just restart your Terminal and you should be done!

Test that it worked by checking your asdf version:

Hopefully, you’ll get back v0.6.2 (or whatever the latest version is).

Done! Skip past the next section (installing asdf on Linux) and move onto the second chapter: installing the Erlang & Elixir plugins for asdf.

Installing asdf on Linux using Git

Sadly we don’t have homebrew on Linux 😢 so we’ll be installing asdf using Git:

  1. Open up Terminal
  2. Check you have Git installed by entering: git --version

If you get a command not found error: download Git and restart your Terminal.

3. Download asdf version 0.6.2:

Now that asdf is downloaded, we’ve got to add it to our shell path.

If you’re using bash, you can do that with:

If you’re using zsh or fish, have a look at the end of the Mac section above. It contains the commands needed for appending asdf’s path to your zsh or fish config file.

Now just restart your Terminal and you should be done!

Let’s test that it worked by updating asdf:

Hopefully, that’ll return something like Updated asdf to release v0.6.2 (or whatever the latest version is.

If not, check you’re using the right shell and have followed the previous steps correctly. If you can’t figure it out after some googling, post a comment down below and I’ll do my best to help out.

Since we’ve installed asdf manually using Git, we should install some packages (as recommended by asdf) to make sure we’re not missing any plugin dependencies.

If you’re on Ubuntu 16 or above, you can do that with:

Or if you’re on Fedora, run this:

Next up, let’s install Elixir and Erlang using asdf.

But Daniel, why do I need Erlang if I just want to use Elixir?

Great question. Elixir is built on Erlang and therefore Elixir code is run inside Erlang’s BEAM VM (Virtual Machine). So we’ll need Erlang if we want to compile and run Elixir code.

Different versions of Elixir require different versions of Erlang (you can find a handy table of which versions are compatible on this page). So we can’t just download one version of Erlang and be done with it. Instead, we’ll use asdf to manage our versions of both Erlang and Elixir.


A table of Erlang & Elixir version compatibilities, as of 4 Jan 2019

But first, asdf needs to understand how to use Elixir and Erlang. To do this, we need to install a couple of plugins:

  1. Open up Terminal
  2. Install the Erlang plugin:

3. Install the Elixir plugin:

Done! Now that asdf knows how to manage Erlang and Elixir, we can start installing them.

Sooo why Elixir 1.3.4? It’s an old version and that number seems oddly specific… 🤔

The answer’s pretty simple: it’s the version of Elixir that Stephen Grider uses in his (fantastic) Elixir & Phoenix Udemy course.

When starting the course, I found that getting started with Elixir was a bit of a struggle. What version of Erlang do I need for Elixir 1.3? How will I switch between versions? What tool should I use to do that? So this is the article I wish I’d had when I started the course :)

According to the table above (found on this page), Elixir 1.3 requires Erlang 18 or 19.

That’ll probably take a while… ⏳

2. When that’s done, let’s install Elixir 1.3.4:

3. Now let’s check that they installed correctly:

Now we should get a list of all versions of all languages that we’ve installed with asdf:

Now try running elixir -v in Terminal. Why doesn’t it work?

So far we’ve installed asdf, installed the Elixir and Erlang plugins for asdf, and installed Elixir 1.3.4 and Erlang 19.3… but we haven’t actually told asdf what versions of Elixir & Erlang to use.

What if we installed ten different versions of Elixir? How would asdf know which one to use?

So next, we’ll explicitly tell asdf which versions of Elixir and Erlang to use.

We’ve just installed Elixir 1.3.4, but right now asdf doesn’t know what version we want to use. Let’s fix that:

  1. Open up Terminal
  2. Tell asdf to use Erlang 19.3 and Elixir 1.3.4 globally:

We’ve told asdf that we want to use Erlang 19.3 and Elixir 1.3.4 by default (globally). That’s what the global part of the command is doing.

Any time we run an Elixir or Erlang command, asdf will look for a .tool-versions file in our current directory. If that file doesn’t specify an Elixir or Erlang version (or if the file doesn’t exist at all), asdf will use our global default. Right now, our global defaults are set to: Erlang 19.3 and Elixir 1.3.4.

Now let’s test that it worked.

3. Restart your Terminal

4. Check what version of Elixir you’re running:

You should get back a similar output to this:

Perfect. You’re now ready to get started using Elixir 1.3.4. So let’s test it out by creating a new project.

Now we’ll create our new project with Elixir 1.3.4 using the mix new command:

  1. Create a new Elixir project called my_legacy_project (or whatever you want to call it):

2. Enter the new my_legacy_project directory:

3. Check that everything has installed correctly by running the project’s tests:

You should see something similar to this:

If all of your tests passed (all 1 of them haha), then congrats! Our new project is set up.

But what would happen if you changed your global Elixir version?

Great question. We’ve created this project with 1.3.4, but what happens if we need to change our global version for a different project? Would we always have to run asdf global elixir <version> when switching projects (and do the same for Erlang too. ).

That sounds tiresome. Thankfully, we won’t ever have to do that because asdf is pretty smart. We can lock projects to a specific version by using the local keyword in asdf. Let’s run the command ourselves to figure out how it works:

1. Tell asdf to use local Erlang and Elixir versions for this project:

So what did we just do? We told asdf to create a file called .tool-versions (this goes in our project file) which keeps track of what language versions a project should use.

2. Let’s have a look at the new file that asdf created:

The cat command will output the contents of a file into our Terminal. So we should get back the contents of .tool-versions :

If a project doesn’t have a .tool-versions file, or if a version isn’t specified in this file, asdf will use the global version that you set.

Setting the project’s local version of Erlang & Elixir by following the steps above

But wait, earlier we set our global Elixir version to 1.3.4, right? So does the .tool-versions file we just made even make a difference? We’re still using Elixir 1.3.4 either way!

You’re right. We’re still using Elixir 1.3.4 right now, either way. But now that we’ve locked down our versions with a .tool-versions file, we get a couple of powerful advantages:

  1. We can commit the .tool-versions file to source control (like Git) so other team members will use the same versions as us (if they use asdf)
  2. We know that our project will always be using the correct versions of Elixir & Erlang, even if we change our global versions in the future

But we’re still using Elixir 1.3.4 both locally and globally. Let’s change that in part 2 by installing Elixir 1.7.4 globally!

Phew. That felt like a lot of commands to just get Elixir up and running. But was it worth it? Let’s have a look at what we’ve just done:

  1. Installed asdf version manager
  2. Installed the Erlang & Elixir plugins for asdf:

3. Installed Erlang 19.3 and Elixir 1.3.4 using asdf:

4. Set asdf to use Erlang 19.3 and Elixir 1.3.4 globally:

5. Created a new project using Elixir 1.3.4:

6. Told asdf to always use Elixir 1.3.4 and Erlang 19.3 for our new project:

Now we have one item left on the todo list: install Elixir 1.7.4 (and Erlang 21.1) globally.

Читайте также: