Windows cannot run disk checking on this volume because it is write protected что делать
Обновлено: 04.07.2024
Вычислять дату вчерашнего дня
Добрый день. Есть большой объем логов, которые пишутся с именами в формате 20130724.log Очень.
Как получить число вчерашнего дня?
Подскажите, пожалуйста, самый простой способ.
Со вчерашнего дня часто no boot device
Здравствуйте, недавно почистил компьютер, и стал виснуть видовс перезагружал компьютер и показывает.
Разработать процедуру, определяющую дату вчерашнего дня
Разработать процедуру, определяющую дату вчерашнего дня.Чтобы при вводе получилось из 01 01 2000-31.
Добавлено через 5 минут
вот это отоброжаеться в командной строке, я вписал:
x:\windows\system32>chkdsk c: /f /r
ответил:
cannot open volume for direct access the type of the file system is NTFS.
Cannot lock current drive.
Windows cannot run disk checking on this volume becouse it is write protected. как только выбираешь обычный запуск, идет загрузка виндовс далее на секунду синий экран и перезагрузка.. мдя..что еще мы не знаем из твоего темного прошлого?
за синий экран я слышу от тебя впервые!
изучай
Со вчерашнего дня svchosts стал есть 50% CPU
Со вчерашнего дня svchosts стал есть 50% CPU. Открыл диспетчер задач, там виден этот svchost, когда.
Имя папки с названием месяца вчерашнего дня
Здрасьте. Суть такова: есть архиватор БД, который умеет архивировать данные за завершённые сутки в.
Как можно вывести дату "вчерашнего дня"?
Привет всем. Нужно архивировать "вчерашние" бекапы, а как их выбрать еще не знаю.
Не могу подключиться по RDP после вчерашнего юбилейного обновления
Я вчера вечером установил "юбилейное" обновление windows 10, теперь не погу подключиться к.
Не могу запустить сервер через python manage.py runserver. Не могу понять в чем проблема. Кто может подсказать?
сделал миграцию но все равно не помогает. Не могу открыть сервер в браузере (venv).
Добрый день. Помогите, пожалуйста, как решить проблему.
Вчера при работе вылезло уведомление про какую-то проблему, кажется в жд и что надо комп перезапустить, я трогать не стала,вечером пока меня не было, ноут выключили и с того момента включить я его не могу. При загрузке у меня выходит синий экран смерти с кодом NTFS file system, иногда бывает FAT file system и тупо идет по кругу перезагрузка ноута.
Итог. В обычном режиме комп не включается, в среду восстановления могу зайти, в биос тоже, через безопасный режим не включается, тоже выходит синий экран и перезагрузка. Лазила в HP ассистенте, точки восстановления на ноуте нет, при попытки восстановления без потери данных написал, что возникла проблема, при попытке восстановления при загрузке выдало, что не удалось восстановить, при попытке создания резервной копии выдало недостаточно памяти.
Есть ли возможность восстановить ноут или уже только замена ЖД поможет?
Просто облазила форумы, что только не пишут, одни говорят, что просто винду переустановить, другие, что ЖД только менять, третьи, что может это в системе, надо всякие проверки сделать и норм будет. Что делать, с чего начать?
Нашла, что надо через ком.строку запустить Chkdsk/f/r, на это у меня выдало
"The type of the file system is NTFS.
Cannot lock current drive.
Windows cannot run disk checking on this volume because it is write protected"
В итоге запустила проверку командой chkdsk c: /f /r /x
но на форуме писали "Вы должны перезапустить систему прежде, чем дисковое сканирование начнется на системном разделе" Что это значит и как и когда перезапустить?
Пока проверка идет, уже выходят строки типа:
Deleting corrupt file record segment .
File record segment . is unreadable
Deleted corrupt attribute list entry with type code 40(128,192) in file .
Помощь в написании контрольных, курсовых и дипломных работ здесь
Checking file system on d
Помогите пожалуйста, не знаю что уже делать( комп запрашивает проверку файловой системы диска.
checking file system on E
вот такая проблема на висте , ни в какой режим в винде не входит, заходя в виндовс ,просто черный.
Checking file system on C: the type of file system is NTFS one of your disk needs to be checked for consistency
При включении компьютера при загрузке всегда показывается надпись: Checking file system on C: the.
Receive Windows cannot run disk checking on this volume because it is write protected in Windows 10 while running CHKDSK.exe? Read this post to realize why it occurs and how to fix it.
By Bryce / Last Updated June 25, 2021
The error: Windows cannot run disk checking on this volume because it is write-protected
CHKDSK is a powerful Windows built-in Windows tool, which can assist you in checking disk integrity, file system errors, and bad sectors so on. It is common that you choose to run disk checking when you trapped in poor situations. For example, you are unable to open SD card even it is detected. However, when you run CHKDSK for SD card, external hard drive partition, etc.in Windows 10/8.1/8/7, you may encounter the following error:
The type of the file system is NTFS.
Windows cannot run disk checking on this volume because it is write-protected.
Why Windows cannot run disk checking on this volume in Windows 10?
As the error implies, it occurs as the partition is write-protected. When a volume is write-protected, that is to say it is in read-only status. And you are only allowed to read the data on the disk; you are not permitted to edit the contents of the drive which includes editing the files or removing them. To settle out thee error, we need to figure out why the volume becomes write-protected.
►Some USB flash drives or SD card reader own physical switch; if the switch is “ON”, your drive will be write-protected.
►The drive on which you need to run CHKDSK has been set as “readonly” in attribute.
►The Value in Windows Registry Key is been set incorrectly.
►The file system of the drive is corrupted or damaged for some unknown reason.
►The selected drive is infected by virus.
5 ways to fix Windows cannot run disk checking on this volume in Windows 10
Since Windows cannot run disk checking on this volume because it is write-protected error occurs as the volume is in read-only status, you can fix the error via removing write protection from the volume. Five effective ways are listed below.
✔ Remove write protection in CMD
When you can’t run” chkdsk n: /f” due to write protection, you can type “chkdsk n: / f/r/x” (“n” is the drive letter of the partition on which you need to run this CHDKSK command.) and hit “Enter” to solve this problem. This command can fix errors, locate bad sectors on the disk and unmount disk.
Note: If your system has been set with write protection on removable device, this command will be invalid and the error “Windows cannot run disk checking on this volume…” will still appear.
✔ Set the write protection switch to unlock position
When your drive is with a physical write protection switch you can check whether it is in lock position. If it is, you should adjust it to unlock position. Then, you are able to run disk checking without the error message above. If your drive is without such physical switch or the switch is on “OFF” side, you can overlook this solution.
✔ Edit Windows Registry Key
If you are in such case, you can open Registry to edit check whether the value data of StoragDevciePolicies WriteProtect. The steps are as follows:
1. Press “Windows + R” at the same time and type “regedit”. Then, press “Enter” key.
2. Navigate to the path below:
PS: If there is no “StorageDevicePokicies” under “Control”, right click “Control”, go to “New”>“Key” and Name the Key with StorageDevicePolicies. Then, right click white space at the right-hand pane and choose “New”>“DWORD (32-bit)” and name it with WriteProtect.
3. Double click WriteProtect, and set the “Value data” to 0.
4. Close Registry Editor.
✔ Clear readonly attribute via Diskpart
If your drive has been set as readonly in Diskpart, you will be unable to run CHDDSK on the drive in Windows 10 as well. In such case, do as the detailed steps given below to clear readonly attribute:
1. Press “Windows + R” input “diskpart” and hit “Enter” key.
2. Type the command lines below in order and every command shall be accompanied with hitting “Enter” key:
“list disk” > “select disk h” , where “h” is the number of the write-protected volume > “attributes disk clear readonly”.
3. Type “exit” when you are prompted that Disk attributes cleared successfully.
Then, you can try to run CHKDSK again to see whether the error disappears.
✔Check the drive for file system errors
To fix this error, you can also scan this drive for file system errors. Below is how to do it in detail:
1. Double click on "This PC" icon to open the File Explorer.
2. Right-click the faulty drive and select "Properties".
3. Navigate to the "Tools" tab and click on "Check".
✔ Format the write-protected partition via third party software
If the solutions described are invalid, you can format your write-protected drive via third-party software – AOMEI Partition Assistant Standard. Free download it and follow the step-by-step tutorial presented below:
PS: Be cautious to format because this operation will delete all data on the partition. Well, the deleted data can be retrieved by some file recovery software.
1. Install AOMEI Partition Assistant Standard and run it. Locate the write-protected partition, right-click it and select “Format Partition.”
2. Here you can determine the partition’s Partition Label, File System and Cluster Size.
3. After reviewing this operation, you can click “Apply”>“Proceed” to execute it.
Notes:✎. AOMEI Partition Assistant Standard is suitable for Windows 10/8.1/8/7, XP and Vista. If you are using Windows Server 2019, 2016, 2012 (R2), or 2008 (R2), you can use AOMEI Partition Assistant Server. It is available to wipe partition or delete partition as well via AOMEI Partition Assistant Standard.
Conclusion
It is unnecessary to try all solutions listed above one by one. Consider the most possible reason for this error and take responding solution to settle “Windows cannot run disk checking in Windows 10 because of write protection” issue.
You may get an error that says the disk is write protected when formatting a USB or SD card in Windows 10/11. Then, how to remove write protection from a disk?
By Emily / Last Updated September 24, 2021
Quick Navigation:
Help! The disk is write protected!
Currently, USB drives (flash drives or pen drives) and SD cards (micro SD or memory cards) are widely used by computer users to store and transfer data. However, some users are confronted with write protection error. Here is one scenario:
“I used my Sandisk Cruizer Edge (32GB) on Windows 10 x64 and Mac Os X 10.7.x for a long time, but from some days I'm unable to add, change or delete files on both OS. I've checked on the Disk Management (under Windows) and I've noticed that the flash-pen is "Read Only" but I'm unable to change that status.
I can't format it, because I receive the error "The disk is write protected". so, now I'm trying to change files status (I see that "Archive" is checked), but again in some files, I receive the same error.
It's very weird. even because I'm able to read everything on it. so the flash-pen works. I've tried to disable and uninstall it, but again, when Windows recognize it, present the same error. ”
Such experience sounds annoying!
Why a disk becomes write-protected?
When you encounter the write protection error, you must be curious about possible causes. Some of the causes are listed below:
● There is a physical write protection switch on some USB drives and SD cards. If this is the situation, then simply move the switch to the unlocked position.
● The USB drive or SD card is attacked by viruses. If you do find a virus, eliminate it using your antivirus software.
● The USB drive or SD card stick is full.
It seems difficult to fix write protection error in the third case for you can’t simply move or delete files on the USB drive or SD card. In this condition, you may try solutions offered in the next part.
How to remove disk write protection in Windows 10/11?
Do you find the disk is write protected in Windows 10/11 and don’t know what to do? Don’t worry! Windows built-in features or a trustworthy write protection removal software can rescue you. For detailed steps about removing write protection from disk in Windows 10/11, refer to the following content.
Solution 1: remove disk write protection using CMD
1. Hit Windows Key + X on your keyboard, and select Command Prompt (Admin) from the menu.
2. Type diskpart and press Enter.
3. Type list disk and press Enter.
5. Type attributes disk clear readonly to change the disk’s properties so that it is no longer read-only and press Enter.
6. Type exit and press Enter twice to exit Diskpart and Command Prompt continuously. Re-plug your USB flash drive to check if the write protection error is solved.
Solution 2: disable write protection by editing the registry
1. Press Windows Key + R to open the Run dialogue. Type regedit and press Enter or click “OK” to open the Registry Editor.
2. Expand the entries on the left-hand pane to navigate to the following path:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control
3. Right click the Control (folder) key, select New, and click on Key. Name the new key StorageDevicePolicies.
4. Select the newly created key, and right click on the white space at the right-hand pane. Select New, and click on DWORD (32-bit) Value. Name the new DWORD WriteProtect.
5. Double click the newly created DWORD and change its value from 1 to 0. Click “OK” to apply the change.
Tips: 1 means “Yes, write protect my USB storage devices.” Conversely, 0 means “No, don’t write protect my USB storage devices.”
6. Close Registry Editor and restart your computer.
Solution 3: remove write protection via a freeware
If you’ve tried the above two solutions and still can’t remove the write protection from USB drive or SD card, formatting the disk is a last resort. AOMEI Partition Assistant Standard is a free partition manager software and disk management tool for computers running 32-bit or 64-bit version of Windows 11, Windows 10, Windows 8.1/8, Windows 7, Vista, and XP.
Keep in mind that formatting a partition will destroy all the data on the partition, so it’s essential to back up all the important files and data before you do. Follow the guidance below to remove write protection from USB in Windows 10 easily:
Step 1. Download, install and launch AOMEI Partition Assistant. Right-click on the USB partition and select “Format Partition”.
Step 2. In the pop-up window, you can name the USB drive by editing “Partition Label” and change file system based on your needs. Click “OK” to continue.
Tips: FAT32 ensures cross-platform compatibility while NTFS supports single file size up to 4GB.
Step 3. Confirm “Pending Operations” and click “Apply” to execute the operation.
Note: To enjoy more advanced features, such as converting system disk into GPT without data loss, you can upgrade to Professional version.
Summary
There are different solutions offered in this article to help you resolve the disk is write protected in Windows 10: write protection switch, antivirus software, CMD, Registry Editor, and AOMEI Partition Assistant. When you find the disk is write-protected in Windows 7, you can also remove write protection using these solutions. Apart from formatting partitions, AOMEI Partition Assistant also enables you to write zeros to a hard drive. Give it a shot right now!
Читайте также: